ISO 9001:2008
Modern means of measuring equipment

Magnetic angle sensor RE22 5V, with bearing

Renishaw plc (Graet Britain)

Angle sensors Magnetic angle sensor RE22 5V, with bearing

The convenient and technological design of the sensor ensures its easy installation and operation.

The magnet is mounted on the shaft and is located inside the sealed housing of the sensor. Its rotation detects a chip placed inside the case, transforming the changes in the gradient of the magnetic field into an output signal of a certain format. The resulting signal is interpolated, resulting in its bit capacity being increased to 13 bits (8192 signals/rev). The maximum operating speed of the shaft of the sensor reaches 20,000 rpm. The output signals are compatible with all industry standards and are transmitted in incremental or analog formats.

The hermetically sealed sensor housing, 22 mm in diameter, has a degree of protection - IP68. RE22 can be used in a variety of devices.
  • Diameter, mm: 22
  • Sensor weight with 1m cable (without connector), g:
    - IP53 Axial cable - 68
    - IP53 radial cable - 60
    - IP64/68 axial cable - 73
  • Length of the sensor together with the shaft, mm:
    - IP68/64 - 43
    - IP53 - 36
  • Housing version: with bearing
  • Resolution, bit: up to 13 (8192 signals/rev)
  • Output formats: incremental and analog (compatible with industry standards)
  • Maximum rotational speed, rpm: up to 20000
  • Maximum error: ± 0.3 °
  • Supply voltage, V: 5 ± 5%
  • Degree of protection: IP53, IP64, IP68
  • Cable outlet: radial (IP53 only), axial
  • Shaft diameter, mm: 4
  • Connector types: without connector, 9-pin or 15-pin "D" connector (parallel format only)
  • Operating temperature, ° C: -25 to +85 (depending on the type of output)
  • Material of the sensor´s housing: aluminum

Additional information