HOMMEL roundscan 555

Production:

JENOPTIK Industrial Metrology Germany (Germany)

HOMMEL roundscan 555

Measuring station HOMMEL roundscan 555 is a highly efficient solution for combined measurements of shape and roughness deviation of measured parts. Depending on the measurement task, the deviation measurements of the shape and roughness can be configured in one program, which will reduce the measurement time for each part.

Features of the system:

• Precision rotary table on pneumatic bearings;
• The vertical axis is available in three different heights, depending on the requirements;
• The basic version of the circular model has a resolution of 1 μm for the R and Z axes, and 20,000 points for the C axis;
• In the High Resolution (HR) version, for combined measurements of shape and roughness, a resolution of 0.1 μm is provided for the R and Z axes, and 720,000 points for the C axis.

System benefits:

Fully automated measurements with an innovative sensor control system for effective measurements of shape deviations, roughness and combined measurements:

• Automated tilt and swivel control of the MDS3 module for measurements in any position on complex parts
  
  
• Measuring probe with two tips - for measuring deviations in shape and roughness
  
  
• Adjustable force of pressing of the measuring gauge;
  
  
• The measurement cycle can be switched from measuring the shape deviation to measuring the roughness during the execution of the specified measuring program.
  
  
• High resolution ruler axes for measuring roughness
  
  
• Low measurement speed - from 0.2 mm / s;
  
  
• Dimensional and roughness measurements can be programmed for fully automatic measurement
  
  
  
• Magnetic fastening allows quick change of measuring probes.

Ergonomics of the workplace:

• Adjustable in height, operator´s folding table;
  
  
• Easy to use while standing and sitting;
  
  
• Lockable cabinets for secure storage of protocols, PCs and printer;
  
  
• Integrated armrest.

Specifications:

Measuring range
Distance between the axes C and Z, mm:	370 / 420 *
Max measured diameter, mm:	430 / 530 *
Max measured height, mm:	350 / 550 / 900
Axis of rotation (axis С)
Table diameter, mm:	330
Aligning the part:	automatic
Error deviation from the roundness of μm + μm / mm height measurement, mkm:	0,02 + 0,0005
Error deviation from the roundness of μm + μm / mm height **measurement, mkm:	0,01 + 0,00025
Error of axial runout at μm + μm / mm radius, μm:	0,03 + 0,0005
Error of axial runout at μm + μm / mm radius**, μm:	0,015 + 0,00025
Centering range, mm:	± 5
Range of leveling, °:	± 1,0
Type of bearing:	pneumatic
Measuring and positioning speed, rpm:	0,2 - 30
Max load, N:	600 / 1000 *
Vertical axis (axisZ)
Measuring range, mm:	350 / 550 / 900
Straightness error / 100 mm, μm:	0,15 / 0,45 / 1,5
Straightness error in the whole range, μm:	0,3 / 0,45 / 1,5
Nonparallelism of C and Z axes for the entire measuring range, μm:	not more than 0,5 / 0,8 / 2,5
Measuring and positioning speed, mm/s:	0,2 - 50
Collision protection:	yes
Horizontal axis (axis R)
Measuring range, mm:	220
Straightness error / 100 mm, μm:	0,25
Straightness error in the whole range, μm:	0,5
Non-perpendicularity of C and R axes, μm:	not more than 0,8
Measuring and positioning speed, mm/s:	0,2 - 50
Dimensions / weight of the measuring system
Length, mm:	1990
Width, mm:	750
Height, mm:	1760 / 1960 / 2310
Weight, kg:	650 / 665 / 685

All accuracy characteristics are given in accordance with DIN 1101 and at a temperature of 20 ± 1 ° C.
Measured deviation from roundness with filter 0-15 S / r; 6 rpm; LSC.
Measured deviation from straightness with cutoff of pitch 2.5 mm; 100 mm / min; LSS.
*-by order;
** - value of max. deviations for the reference circle LSCI, filter 0-15 S / r; 6 rpm.