ISO 9001:2008
Modern means of measuring equipment
 

Manometers for measuring differential pressure

Production:
WIKA (Germany)

Differential pressure devices are used to measure the difference between two separate pressures. The base pressure is that which is present on the side taken as the reference.

Springs of the same shapes as in the pressure gauges are used as the sensitive elements. Typically, the sensing elements are exposed to pressure from both sides. The pressure difference set in this manner is transmitted by the arrow mechanism directly to the scale.

Pressure gauge type 700.01, 700.02

Production:
WIKA (Germany)
Pressure gauge type 700.01, 700.02
  • Application: Filtering units, Pump control;
  • Measuring range: from 0 ... 400 mbar to 0 ... 10 bar;
  • Units of measure: mbar, bar;

Pressure gauge type 732.14

Production:
WIKA (Germany)
Pressure gauge type 732.14
  • Application: for measuring points with high differential pressure and / or high operating pressure (static pressure), as well as for use in aggressive conditions;
  • Measuring range: from 0 ... 40 bar;
  • Units of measure: mbar, bar;

Pressure gauge type 732.51

Production:
WIKA (Germany)
Pressure gauge type 732.51
  • Application: for gaseous and liquid corrosive media, not highly viscous or crystallizing, also under aggressive conditions;
  • Features: differential pressure measurement range from 0 ... 16 mbar;
  • Measuring range: from 0 ... 16 mbar to 0 ... 25 bar;
  • Units of measure: mbar, bar;

Pressure gauge type A2G-10

Production:
WIKA (Germany)
Pressure gauge type A2G-10
  • Application: for dry, clean and non-corrosive gases, for air;
  • Features: zero adjustment in front;
  • Measuring range: 0 ... 50 Pa to 0 ... 12500 Pa, -25 ... +25 Pa to -1500 ... + 1500 Pa;
  • Units of measure: Pa;

Additional information