TALIROND SERIES 365
- Production:
- Taylor Hobson (Great Britain)
Talirond 365 - a new series of devices made on a modular principle, has unique flexibility for measuring a wide range of parts in both laboratory and workshop conditions. Unrivaled in their characteristics (speed, accuracy, powerful mathematical support)
Automatic calibration
Automatic centering and alignment
Auto tracking mode
Fast automatic measurements
High loading capacity of the table - up to 75 kg
The device can be equipped with a motorized radial arm, or with a radial block to control straightness. When measuring from a sample, up to 18,000 points are taken, which allows for a more detailed analysis of precision parts.
Talirond Series 365 devices allow analysis:
- Circles
- Cylindricality
- Concentricity
- Eccentricity
- Planarities
- Perpendicularity
- Alignment
- Beating
- Complete beating
- Parallelism
- Vertical straightness
- Angle of profile inclination
- Horizontal straightness
- Harmonic analysis
Additional mathematical support
- Piston measurement
- Statistical analysis
- Topography of the zone on the cylinder
All devices consist of seven main blocks:
- Base
- Spindle with table
- Vertical displacement block
- Horizontal movement block
- Sensor with probe
- Interface unit
- Computer
- Depending on specific requirements, as well as on
- financial opportunities, the following are proposed:
- Column of 300 mm, 500 mm and 900 mm
Centering and aligning
- Manually (there is help in the program)
- Automatic (under computer control)
Horizontal movement block
- MRA with automatic sensor movement, without the possibility of measuring horizontal straightness
- RSU with the ability to measure horizontal straightness and parallelism
Talimin 5 sensor
Unsurpassed performance: accuracy, range, resolution, stability, built-in travel limiter, adjustable measuring force.
SELECTION OF CONFIGURATION OF THE TALIROND 365 SERIES
| Column 300 mm | * | * | * | * | ||||||
| Column 500 mm | * | * | * | * | ||||||
| Column 900 mm | * | * | ||||||||
| RSU(horizontal linearity) | * | * | * | * | * | |||||
| MRA (without horizontal linearity) | * | * | * | * | * | |||||
| Autocentering | * | * | * | * | * | * | ||||
| Manual centering | * | * | * | * |
SPECIFICATIONS
| MEASURING ABILITIES | Column 300 mm | Column 500 mm | Column 900 mm |
| Maximum diameter | 350 mm (can be extended to 450 mm) | ||
| Maximum height | 300 mm | 500 mm | 900 mm |
| Maximum mass of the detail: | 75 kg for table with auto-centering 20 kg for table with manual centering | ||
| SIZE OF THE DEVICE | Column 300 mm | Column 500 mm | Column 900 mm |
| Width | 870 mm | 870 mm | 870 mm |
| Depth | 705 mm | 705 mm | 705 mm |
| Height | 1460 mm | 1660 mm | 2260 mm |
| Table height | 890 mm | 890 mm | 890 mm |
| Dimensions of the measured stations | 900 mm х 850 mm х 750 mm | ||
| Recommended space for installation | 1000 mm х 800 mm + measuring station | ||
| Nominal mass | 276 kg | 282 kg | 299 kg |
| COLUMN | Column 300 mm | Column 500 mm | Column 900 mm |
| Non-straightness at full height | 0.3 mkm | 0.3 mkm | 1.0 mkm |
| Parallelism to the axis of the spindle | 0.5 mkm | 1.0 mkm | 2.0 mkm |
| Non-straightness on any 100 mm | 0.15 mkm | 0.15 mkm | 0.3 mkm |
| Speed of transport | 0.25-20 mm/s | ||
| Measuring speed | 0.25-20 mm/s | ||
| Contact speed | 0.5-5 mm/s | ||
| Positioning accuracy | +/- 5 mkm | +/- 5 mkm | +/- 10 mkm |
| Resolution | 0.25 mkm | ||
| Minimal movement | 0.05 mm | ||
| SPINDLE | Precision air bearing |
| Rotation speed | 0.6, 1, 2, 6, 10 rot/min, in both directions |
| Limit of radial error (above table level) | +/- 0.02 mkm + 0.0003 mkm/mm |
| Limit of axial error (radius from the center) | +/- 0.02 mkm + 0.0003 mkm/mm |
| Positioning accuracy | +/- 0.2 deg. |
| Разрешение | 0.02 deg. |
| Minimal movement | 0.1 deg. |
| Nomber of dots | 18.000 (max) |
| CENTER AND LEVELING TABLE | AUTOMATIC | MANUAL |
| Auto tracking mode | yes | no |
| Centering range | +/- 5 mm | +/- 1mm |
| Leveling range | +/- 0.5 deg. | +/- 0.25 deg. |
| Height of the neutral plane | no | 20 mm |
| Auto centering error | <0.8 mkm | no |
| Autoignment error | <0.8 sek. | no |
| Diameter of the table | 300 mm | 190 mm |
| MECHANISM OF HORIZONTAL TRANSMISSION OF THE SENSOR | Horizontal straightness measurement module | Motorized radial arm |
| Range of movement | 200 mm | 200 mm |
| Non-straightness at full length | 0.25 mkm | no |
| Non-straightness on any length | 0.125 mkm + 0.000625 mkm/mm | no |
| Perpendicular to the spindle axis | 1 mkm/200 mm | no |
| Transport speed | 0.25 – 15 mm/s (by steps) | 0.25 – 15 mm/s (by steps) |
| Measurement moving speed | 0.25 – 15 mm/s (by steps) | No |
| Speed of contact moving | 0.5 – 5mm/s (by steps) | 0.5 – 5mm/s (by steps) |
| Moving behind the spindle axis | 25 mm | 25 mm |
| Positioning accuracy | +/-5 mkm | +/-5 mkm |
| Resolution | 0.25 mkm | 0.25 mkm |
| Minimal moving | 0.05 mm | 0.05 mm |
| Number of data points | 200.000 max | no |
| MEASURING SENSOR | |
| Location | Vertical / horizontal |
| Type of the sensor | Talimin 5, inductive |
| Range / Resolution normal | +/- 1 mm / 0.03 mkm |
| Range / Resolution medium | +/-0.2 mm / 0.006 C8mkm |
| Range / Resolution low | +/-0.08 mm / 0.0012 mkm |
| Measuring force | 0 – 15 g (regulated) |
| Tilt angle | Regulated |
| Requirements for external conditions | |
| Process temperature | 10 -35 deg. |
| Storage temperature | -10 – 50 deg. |
| Temperature change | Not more than 2 deg/h |
| Operating relative humidity | 30 -80 %, without condensation |
| Storage humidity | 10 -90 %, without condensation |
| Max. RMS vertical component of the vibration of the floor | 0.05 mm/s for frequencies < 50 Hz 0.1 mm/s for frequencies > 50 Hz |
| Air speed | 1 м/s max |
| Power requirements for the air | |
| Pressure | 5.5-10.3 bar |
| Regulator (installed) | 3.5 bar |
| Filter | <= 5 mkm |
| Dew point | -20 deg.S |
| Flow (min) | 150 l/min |
| Max. oil content | 25 mg/m sq. |
| Power requirements | |
| Device and computer | 90-260 V - installates |
| Frequency | 47-63 Hz |
| Power (max) | 2500 V/А |
